WS Group

item WS Group

AC switching power supply
WS Group0
WS シリーズ0
Specifications The "Wave Series" is an AC switching regulator that uses PWM control.
Characteristics It is a compact, lightweight, and highly functional unit with variable output, constant voltage, and various built-in protection circuits.
Built-in main circuit protection fuse and control circuit protection fuse
ETC For use as a control power source for various test equipment
For use as a countermeasure against voltage fluctuations on other lines due to load fluctuations
For use as a stabilized power source to counter power fluctuations
Request a catalog for this product
Specifications
Type WSA WSC
Number of Phases Single-phase Single-phase
Wiring 2-wire 2-wire
Frequency 50/60 Hz±1 Hz 50/60 Hz±1 Hz
Rated Input Voltage 100/110 V 200/220 V
Input Voltage Variation Range 90 ~ 121 V 180 ~ 242 V
Rated Output Voltage 100/110 V 200/220 V
Voltage Setting Range WSA-2CV: 0 ~ 95 % WSC-1CV: 0 ~ 95 %
WSA-60CV: 0 ~ 92 % WSC-30CV: 0 ~ 92 %
  WSC-60CV: 0 ~ 92 %
Output Voltage Accuracy WSA-2CV: ±1.0 % WSC-1CV: ±1 %
WSA-60CV: ±0.5 % Other WSC: ±0.5 %
Load Variation 0 ~ 100 % 0 ~ 100 %
Load Power Factor −20 ~ +70 % −20 ~ +70 %
Waveform Distortion Rate ≤ 1 % ≤ 1 %
Response Time WSA-2CV: ≤ 0.5 s WSC-1CV: ≤ 0.5 s
WSA-60CV: ≤ 0.2 s Other WSC: ≤ 0.2 s
Soft-start Time WSA-2CV: approx. 0.5 ~ 5 s WSC-1CV: approx. 0.5 ~ 5 s
WSA-60CV: approx. 0.2 ~ 5 s Other WSC: approx. 0.2 ~ 5 s
Current Limit Approx. 0 ~ 115 % Approx. 0 ~ 115 %
Overcurrent Protection Output shutdown at 200 % Output shutdown at 200 %
WSA-2CV: auto-reset after 1~1.5 s WSC-1CV: auto-reset after 1~1.5 s
WSA-60CV: latch, auto-reset by reset signal Other WSC: latch, auto-reset by reset signal
Efficiency ≥ 95 % ≥ 95 %
Power Factor ≥ 0.98 ≥ 0.98
Control Signal Current (4 – 20 mA) · Voltage (1 – 5 V) · Manual (1 KΩ VR) optional Current (4 – 20 mA) · Voltage (1 – 5 V) · Manual (1 KΩ VR) optional
Internal Settings MIN (Lower Limit) 0 ~ 100 % · DAMP (Slope) 100 ~ 0 % · LIMIT (Current) 100 ~ 0 % MIN (Lower Limit) 0 ~ 100 % · DAMP (Slope) 100 ~ 0 % · LIMIT (Current) 100 ~ 0 %
Ambient Temperature 0 ~ 40 °C 0 ~ 40 °C
Ambient Humidity 30 ~ 95 % RH 30 ~ 95 % RH
Insulation Resistance ≥ 50 MΩ (DC 500 V megger) ≥ 50 MΩ (DC 500 V megger)
Dielectric Strength AC 1500 V for 1 minute AC 1500 V for 1 minute
Request a catalog for this product
Product Specifications
WS Group Specifications
WSA type 100/110V constant voltage
Model Rated Current Rated Power Body dimensions Mass
WSA-2CV 2A 200/220 50×165×220 1.3kg
WSA-60CV 60A 6/6.6k 335×170×400 20kg
WSC type 200/220V
Model Rated Current Rated Power Body dimensions Mass
WSC-1CV 1 200/220 50×165×220 1.3kg
WSC-30CV 30A 6/6.6k 335×170×400 20kg
WSC-60CV 60A 12/13.2k 335×170×400 20kg
< Back to list
page top
CONTACT