WaveWS-NCV Series｜Alternating Current Switching Power Supply｜PRODUCTS｜Tokyo Rikosha co.,Ltd

PRODUCTS

Wave　WS-NCV Series Alternating Current Switching Power Supply　

Wave　WS-NCV Series

--WaveSeries--
Phase control's electric control adjuster is possible to control even by the difficult control field. Becuse output voltage phase is sine wave.

Specifications
The stabilizing supply conduct adjustment of voltage that AC power does direct switching. Phase control's electric control adjuster is possible to control even by the difficult control field. Becuse output voltage phase is sine wave.
Characteristics
Compact installation space is demanded.
 Stable accurate output voltage. Sine wave output(sine distortion).
 Load fluctuation feedback function high efficiency(more than 95%) ,high power factor(more than 0.98) are achieved.
 Noise filter incorporated input and output.
 Three kind of protection function are installed.
 Over current limiter. Peak current limiter.
 Intercept output when peak over current is detected.
 The new type made to a small size and a low cost with the old type WSA・WSC series the function and the performance maintained.
Uses
Control electronic source of various test device ,
To countermeasure voltage of the load fluctuation by the another line,
To the stabilizing electronic source of countermeasure voltage fluctuation

Product Specifications

WS-NCV Series

Type WSA-NCV WSC-NCV
Phase Single Phase Single Phase
Line Type 2 Line 2 Line
Frequency 50/60Hz±1Hz 50/60Hz±1Hz
Constant Input Voltage
 100/110V 200/220V
Voltage change range 90~121V 180~242V
Constant Output Voltage 100/110V 200/220V
Constant Output Current 6.10.20.30A 3.5.10.15A
Voltage range 0~95% 0~95%
Accuracy voltage output
 ±0.5% ±0.5%
Load change 0~100% 0~100%
Load power range
 -20~+70% -20~+70%
Wave dist range 1% 1%
Efficiency 95%以上 95%以上
Power factor 0.98以上 0.98以上
Call time 0.2S 0.2S
Soft up time 0.2S - 5S Possible to change 0.2S - 5S Possible to change
Current limit Hugging down in 120%(possible to change to LIMIT・VR) Hugging down in 120%(possible to change to LIMIT・VR)
Protect over current Output shutdown in 200% (self maintenance・automatic exchange return) Output shutdown in 200% (self maintenance・automatic exchange return)
Signal control Current signal (4-200mA)・Voltage signal(1.5V)・Manual setting(1KΩVR)selling separately Current signal (4-200mA)・Voltage signal(1.5V)・Manual setting(1KΩVR)selling separately
Internal machine MIN(minimum setting)0 - 100%・DAMP(Gradient setting)100 - 0%･LIMIT(Current limit)100 - 0% MIN(minimum setting)0 - 100%・DAMP(Gradient setting)100 - 0%･LIMIT(Current limit)100 - 0%
Ambient Temperature 0~40℃ 0~40℃
Ambient Humidity

 35~93% 35~93%
Increase temperature within 80deg within 80deg
Insulation Voltage Endurance More than 50MΩ at DC500 megger More than 50MΩ at DC500 megger
Insulation Voltage Endurance AC1500V　for 1 minute AC1500V　for 1 minute

WSAType 100/110V Constant voltage

Type Output current
A		 VA Size Mass
WSA-6NCV 6A 600 108×189×232 2.8kg
WSA-10NCV 10A 1K 136×189×232 4kg
WSA-20NCV 20A 2K 260×250×287 12kg
WSA-30NCV 30A 3K 360 ×250×287 13kg

WSCType 200/220V Constant voltage

Type Output current
A		 VA Size Mass
WSC-3NCV 3A 600 108×189×232 2.8kg
WSC-5NCV 5A 1K 136×189×232 4kg
WSC-10NCV 10A 2K 260×250×287 12kg
WSC-15NCV 15A 3K 360×250×287 13kg

Click here order catalog