SSA Series｜Thyristor Type｜Auto Power(Slide Trance System)｜PRODUCTS｜Tokyo Rikosha co.,Ltd

PRODUCTS

Thyristor Type　SSA Series Stabilizing Power Supplies

SSA Series

Specifications
Stabilizing supply use thyristor・control reactor・main transformer and filter for waveform correction.　
Characteristics
The small size and lightness have been achieved by using the thyristor.
USES
Stabilized to large changing power supply.
Operates stability highly accurate equipment.
Use for the production line to the defective rate decrease.
ETC
Single phase

Product Specifications

●S Series

Type SSA SSC STC
Phase Single Phase Single Phase 3Phase
Line Type 2 Line 2 Line 3 Line
Frequency 50 or 60Hz(It switches by SW switch until single phase 5KVA.) 50 or 60Hz(It switches by SW switch until single phase 5KVA.) 50 or 60Hz(It switches by SW switch until single phase 5KVA.)
Constant Input Voltage 100V 200V 200V
Constant Output Voltage 100V 200V 200V
Accuracy voltage output ±0.4% ±0.4% ±0.4%
Voltage change range 85~115V 170~230V 170~230V
Output constant current 100V 200V 200V
Load change 0~100% 0~100% 0~100%
Wave dist range 3% 3% 3%
Call time 0.15S 0.15S 0.15S
Efficiency More than Approx 85% (Less than 1KVA more than 80%) More than Approx 85% (Less than 1KVA more than 80%) More than Approx 85% (Less than 1KVA more than 80%)
Ambient Temperature -10~40℃ -10~40℃ -10~40℃
Ambient Humidity 30~85% 30~85% 30~85%
Insulation Voltage Endurance 10MΩ at DC500 megger 10MΩ at DC500 megger 10MΩ at DC500 megger
Insulation Voltage Endurance AC1500V　for 1 minute AC1500V　for 1 minute AC1500V　for 1 minute

SSAType　 Single Phase100V　　85 - 115V

Type Output current
A		 Output capacity
VA		 Size
WDH
 Mass　Kg
SSA-5 5 500 420×400×199 22
SSA-10 10 1K 420×400×199 31
SSA-15 15 1.5K 420×400×199 37
SSA-20 20 2K 420×500×249 41

Click here to order catalog