STC Series｜Thyristor Type｜Auto Power(Slide Trance System)｜PRODUCTS｜Tokyo Rikosha co.,Ltd

PRODUCTS

Thyristor Type　STC Series Stabilizing Power Supplies

STC Series

Specifications
Stabilizing supply use thyristor・control reactor・main transformer and filter for waveform correction.　
Characteristics
The small size and lightness have been achieved by using the thyristor.
USES
Stabilized to large changing power supply.
Operates stability highly accurate equipment.
Use for the production line to the defective rate decrease.
ETC
Three phase

Product Specifications

●S Series

Type SSA SSC STC
Phase Single Phase Single Phase 3Phase
Line Type 2 Line 2 Line 3 Line
Frequency 50 or 60Hz(It switches by SW switch until single phase 5KVA.) 50 or 60Hz(It switches by SW switch until single phase 5KVA.) 50 or 60Hz(It switches by SW switch until single phase 5KVA.)
Constant Input Voltage 100V 200V 200V
Constant Output Voltage 100V 200V 200V
Accuracy voltage output ±0.4% ±0.4% ±0.4%
Voltage change range 85~115V 170~230V 170~230V
Output constant current 100V 200V 200V
Load change 0~100% 0~100% 0~100%
Wave dist range 3% 3% 3%
Call time 0.15S 0.15S 0.15S
Efficiency More than Approx 85% (Less than 1KVA more than 80%) More than Approx 85% (Less than 1KVA more than 80%) More than Approx 85% (Less than 1KVA more than 80%)
Ambient Temperature -10~40℃ -10~40℃ -10~40℃
Ambient Humidity 30~85% 30~85% 30~85%
Insulation Voltage Endurance 10MΩ at DC500 megger 10MΩ at DC500 megger 10MΩ at DC500 megger
Insulation Voltage Endurance AC1500V　for 1 minute AC1500V　for 1 minute AC1500V　for 1 minute

STCType　 3Phase200V　　170 - 230V

Type Output current
A		 Output capacity
VA		 Size
WDH
 Mass　Kg
STC-8.6 8.6 3K 400×550×770 120
STC-14 14 5K 400×550×770 150
STC-21 21 7.5K 450×600×860 200
STC-28 28 10K 510×690×1000 250

Click here to order catalog